QED 2-MONO - Electronic panel for 3 HP single-phase electric pumps

The electrical panel is designed for connection with the thermal protector inserted in the winding of the PEDROLLO VXC, PVXC, MC, PMC drainage pumps.

It is designed for the connection of four floats (alternating running of the first pump, running of the second pump, stop and alarm level).

It contains an electronic card that allows you to adjust the current value at which the protection against overloads and short circuits intervenes.

If the probes are activated, the motor is stopped, the red LED lights up to indicate the maximum or minimum level alarm depending on the type of operation chosen, filling and emptying, and the alarm output contact is activated.
This signal can be excluded by positioning the DIP-SWITCH 3 in the OFF position.

By acting on the "SENS CL" trimmer, the sensitivity of the probes is changed to adapt them to the conductivity of the liquid, therefore it must be increased in the presence of liquids with poor conductivity.