EHC-01-12 - Convertor electro-hydraulic control 12 zones

Convertor Electro-Hydraulic "12 stations"

Devices that turn the electrical signals originating from sophisticated and versatile programmers electronic controls that can be used by the valves to the hydraulic control of a normally closed type or normally open.

Features

• Convenient installation out of the ground. Can be easily installed on all pedestals programmers Toro

• Each sector can be operated manually by the converter

• Modular construction: Each single translation unit can be easily replaced

• Convenient insertion and clamping of tube-hydraulic command

• Water filtration inlet and outlet

• Possibility of unbounded expansion with the addition of the desired number of unitàdi conversion

• For hydraulic systems N. A.

• Ideal for areas subject to risk of lightning strikes where the water used for irrigation has a high content of suspended substances

Specifications

• Maximum distance from converter to valve : with tube diameter of 3⁄16" (152 m) with tube diameter of¼": 304 m

• Operating pressure: 2,8-10.3 bar (40-150 psi) in the tubes of command

• Solenoid: 24 V ac, (50/60 Hz)

• Inrush current: 0,37 A, (8,80 VA)

• Power consumption: 0.30 A, (7,20 VA)

• Solenoids with wires insulated: 18 AWG x 1.2 m, identified by the colour of the insulation

• Specific information on the difference :

• Valves of the normally open type (N. A.) - the price of the installation of the valves must be in the range of 7.6 m above and 21.3 m below the level of the converter

* All hydraulic connections on the valves Toro are of the type with connection of¼".

Note: use in temperatures that reach freezing (0°C) makes it necessary to use adequate precautions to ensure the thermal insulation