PWM II 230 1 Basic / 8.5 - 8.5 A single-phase inverter

60170887

New product

Inverter for single-phase pumps up to 1.5 HP

More details

  • 230 V

Acquistando questo prodotto puoi ricevere fino a 325 punti . Il totale del tuo carrello è 325 punti può essere convertito in un voucher di: 3,25 € .


Our services

Telephone assistance for information before purchase.

After-sales assistance to the installation of the product.

More info

The inverter for electric pumps keeps the pressure constant as the flow varies, regulating the speed of the pump.

Inside it has a flow sensor and a pressure sensor that allow it to know the operating conditions of the system instant by instant, guaranteeing a constant pressure as conditions vary.

The PWM inverter combines comfort and savings, integrates all the protections necessary for a pump, and is easy to install and configure.

It guarantees maximum silence of the pump and an increase in its average life.

The PWM inverter can drive any type of pump and energy savings can reach up to 60%.

The PWM II 230 1-BASIC / 8.5 uses single-phase power supply and drives single-phase pumps up to 1.1 Kw or 1.5 HP, delivering a maximum current of 8.5 Ampere rms.

the PWM II 230 1-BASIC / 8.5 is ideal for domestic applications, especially where it is necessary to replace an autoclave, without changing the pump.

The inverter is supplied with input cables with schuko plug to connect to the electric current and output with schuko socket to connect the pump.

Features Active Driver

Scheda inverter

Inverter

The Active Drivers Plus does absorb at the pump, the minimum power required to meet the water demand, thereby avoiding unnecessary wastes and allowing considerable energy savings.

Display inverter

Display

Oled Display for high readability. The intuitive interface allows you to access all the information and customise the main settings according to the the specification.

Aumento della vita della pompa.

Increase the life of the pump.

Thanks to the technology inverter, which reduces the speed of the motor, it has considerable increase of the life of the pump.

Predisposizione per il funzionamento nei gruppi

Predisposition to the operation in groups

The Active Driver Plus is intended for operation in the groups of pressurization. Each pump needs an Active Driver Plus the controls in order to minimize the consumption of electrical power.

Sensori di flusso e di pressione

Sensors of pressure and flow

Transducer electronic pressure and flow sensor integrated. The Active Driver Plus does not require external sensors.

Valvola di non ritorno

Non-return valve

Easily removable for maintenance.

THE MAIN DIFFERENCES WITH THE PREVIOUS MODEL

THE PREVIOUS MODEL


Modello precedente

NEW MODEL PLUS


Nuovo modello Plus

Reliable

The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

Easy to install

The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

Easy to set up

The inverter, using the wizard, it is easily readable on the display, guide the installer to the inclusion of all the necessary parameters and helps in some cases, the definition of the setting is appropriate.

Trasparenza e valvola di non ritorno dell'Active Driver Plus

NEW INTERFACE DISPLY AND SOFTWARE

Software

Same functionality as the previous version.

Connectivity with other equipment on all models up to 8 pumps.

Backward compatibility of software that is able to upgrade its previous versions.

OLED Display

Installation wizard and simplified by using the Wizard.

Improved the usability of the information thanks to the graphic display.

Better visibility for resolution and high contrast.

Graphical explanation and description of the parameter.

Possibility to choose the language of the menu.

Interface

New button 'ENABLE' to shut down/restart the machine.

Interfaccia Active Driver Plus

NEW CONSTRUCTION OF THE COVER

Coperchio Active Driver Plus
  1. Cable glands trade replaced the old cable glands moulded providing greater protection.

  2. Added, at the bottom, 3 holes closed for inputs/outputs with screw cap M16.

  3. The external screws of the clamping of the cover, and the area of the seal increase the sealing reliability of the cover.

Seat OR of the cover with better compression and seal.

Tenuta ACTIVE DRIVER Plus

NEW CONSTRUCTION OF THE BODY

Tappo di scarico dell'Active Driver Plus

Drain plug and 3/8 "in plastic instead of 1/4" brass hex.

Sede del sensore dell'Active Driver Plus

The seat of the pressure sensor is extremely robust.

NEW CONSTRUCTION OF THE SINK

  1. Improved cooling of the inverter through the increased opening for the passage of water on the sink.



  2. Two models: one for 230 and a 1-Basic and one for 400 and great, and the internal pocket to help the dissipation.



  3. Coupling screws to the card more accessible: allow you to remove the card while maintaining the system under pressure.



  4. Material CW617N instead of CW614N suitable for certification of drinking water in most states.



Dissipatore dell'Active Driver Plus

NEW CONSTRUCTION OF THE ELECTRONIC CARD

Scheda elettronica dell'Active Driver Plus
  1. And increased reliability due to transformer Switching and non-linear, which has also permitted a reduction of the weight.



  2. The cards are unified, and all models have 4 Input and 2 Output.



  3. The version 8.5 Arms now has an available input.



  4. Possibility of installing a pressure sensor, auxiliary. For example, it can be installed after a filter (e.g. water softener) or a boiler to compensate for their losses.



NEW CONSTRUCTION OF THE NON-RETURN VALVE


Dettaglio valvola di non ritorno dell'Active Driver Plus

Valvola di non ritorno dell'Active Driver Plus
  • Seals on the sleeve ensuring greater tightness and minimum flow the lowest.

  • Solves the problem of leakage continues.

  • Max flow rate 300 l/min guaranteed load losses to 9 metres instead of 15.

  • Special screws of fastening from the outside (any leakage will not damage the card).

  • The screws used are torx with pin anti-theft, with head gasket.

  • Easily maintained thanks to the possibility of replacing the or.

  • The material NORYL.

Recensioni

Siate il primo a fare una recensione !

Scheda tecnica

Power data
Power line single phase
Line voltage 230 V
Stages of line 1 x 230 V
Output data
Motor power single phase
Motor voltage 230 V
The motor phases 1 x 230 V
Motor power (Kw) 1.1 Kw
Safeties
Meter Yes
Dry running Yes
Construction features
The mouth of the Suction 1 "1/4
Outlet 1 "1/2
Default
Warranty Two years

Prodotti correlati

Customers who bought this product also bought:

Download

Brochure PWM 230 1-Basic

Inverter characteristics PWM 230 1-Basic.

Download (392.52k)

PWM 230 1-Basic manual

User manual with instructions for the installation and use of the WaCs PWM 230 1-Basic in-line inverter.

Download (432.32k)