English

Call us now: 388 73 64 030

Blog

View larger

PWM II 400 D / 13.3 - 13.3 A three-phase inverter

Reference: 88001052

Condition: New product

Inverter for three-phase pumps up to 7.5 HP

More details

Acquistando questo prodotto puoi ricevere fino a 935 punti . Il totale del tuo carrello è 935 punti può essere convertito in un voucher di: 9,35 € .

Our services

Telephone assistance for information before purchase.

After-sales assistance to the installation of the product.

Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

More info

PWM 400 is an integrated system for the variable speed control (INVERTER) of electric pumps, capable of keeping the pressure constant as the flow rate varies.

Through the different possible settings and the availability of configurable input and output contacts, it is possible to adapt the operation of the PWM system to the needs of various systems.

PWM 400 drives electric pumps with standard three-phase asynchronous motors and is powered by a three-phase line. The power supply voltage of the motor of the electric pump installed must be 400V 50Hz three-phase. The utility connected to PWM 400 must not exceed 13.3 Arms as phase current.

Features Active Driver

Inverter

The Active Drivers Plus does absorb at the pump, the minimum power required to meet the water demand, thereby avoiding unnecessary wastes and allowing considerable energy savings.

Display

Oled Display for high readability. The intuitive interface allows you to access all the information and customise the main settings according to the the specification.

Increase the life of the pump.

Thanks to the technology inverter, which reduces the speed of the motor, it has considerable increase of the life of the pump.

Predisposizione per il funzionamento nei gruppi

Predisposition to the operation in groups

The Active Driver Plus is intended for operation in the groups of pressurization. Each pump needs an Active Driver Plus the controls in order to minimize the consumption of electrical power.

Sensors of pressure and flow

Transducer electronic pressure and flow sensor integrated. The Active Driver Plus does not require external sensors.

Non-return valve

Easily removable for maintenance.

THE MAIN DIFFERENCES WITH THE PREVIOUS MODEL

THE PREVIOUS MODEL

NEW MODEL PLUS

Reliable	The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.
Easy to install	The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.
Easy to set up	The inverter, using the wizard, it is easily readable on the display, guide the installer to the inclusion of all the necessary parameters and helps in some cases, the definition of the setting is appropriate.

NEW INTERFACE DISPLY AND SOFTWARE

Software

Same functionality as the previous version.

Connectivity with other equipment on all models up to 8 pumps.

Backward compatibility of software that is able to upgrade its previous versions.

OLED Display

Installation wizard and simplified by using the Wizard.

Improved the usability of the information thanks to the graphic display.

Better visibility for resolution and high contrast.

Graphical explanation and description of the parameter.

Possibility to choose the language of the menu.

Interface

New button 'ENABLE' to shut down/restart the machine.

NEW CONSTRUCTION OF THE COVER

Cable glands trade replaced the old cable glands moulded providing greater protection.
Added, at the bottom, 3 holes closed for inputs/outputs with screw cap M16.
The external screws of the clamping of the cover, and the area of the seal increase the sealing reliability of the cover.

Seat OR of the cover with better compression and seal.

NEW CONSTRUCTION OF THE BODY
Drain plug and 3/8 "in plastic instead of 1/4" brass hex. The seat of the pressure sensor is extremely robust.

NEW CONSTRUCTION OF THE SINK

Improved cooling of the inverter through the increased opening for the passage of water on the sink.
Two models: one for 230 and a 1-Basic and one for 400 and great, and the internal pocket to help the dissipation.
Coupling screws to the card more accessible: allow you to remove the card while maintaining the system under pressure.
Material CW617N instead of CW614N suitable for certification of drinking water in most states.

NEW CONSTRUCTION OF THE ELECTRONIC CARD

Scheda elettronica dell'Active Driver Plus

And increased reliability due to transformer Switching and non-linear, which has also permitted a reduction of the weight.
The cards are unified, and all models have 4 Input and 2 Output.
The version 8.5 Arms now has an available input.
Possibility of installing a pressure sensor, auxiliary. For example, it can be installed after a filter (e.g. water softener) or a boiler to compensate for their losses.

NEW CONSTRUCTION OF THE NON-RETURN VALVE

Dettaglio valvola di non ritorno dell'Active Driver Plus

Valvola di non ritorno dell'Active Driver Plus

Seals on the sleeve ensuring greater tightness and minimum flow the lowest.
Solves the problem of leakage continues.
Max flow rate 300 l/min guaranteed load losses to 9 metres instead of 15.
Special screws of fastening from the outside (any leakage will not damage the card).
The screws used are torx with pin anti-theft, with head gasket.
Easily maintained thanks to the possibility of replacing the or.
The material NORYL.

Recensioni

Siate il primo a fare una recensione !

Scheda tecnica

Power data
Power line	Three phase
Line voltage	400 V
The current line	16
Stages of line	3 x 400 V
Output data
Motor power	Three phase
Motor voltage	400 V
The motor phases	3 x 400 V
Motor power (Kw)	5.5 Kw
Safeties
Meter	Yes
Dry running	Yes
A short-circuit between the phases	Yes
Construction features
The mouth of the Suction	1 "1/2
Outlet	1 "1/2
Degree of protection	IP 55
Specifiche tecniche
Flow rate max. (l./min.)	400
Dimensioni e peso
Width (cm)	23.7
Depth (cm)	18.4
Height (cm)	28.2
Default
Warranty	Two years

Prodotti correlati

Customers who bought this product also bought:

264-06-03 -...

Attack male/male. Without flow regulator. At...

Download

Manual PWM 230-400

User manual with instructions for installation and use of inverters in series line PWM 230-400 of WaCs.

Download (697.38k)

PWM II 400 D / 13.3 - 13.3 A three-phase inverter

Our services

More info

Features Active Driver

Inverter

Display

Increase the life of the pump.

Predisposition to the operation in groups

Sensors of pressure and flow

Non-return valve

THE MAIN DIFFERENCES WITH THE PREVIOUS MODEL

THE PREVIOUS MODEL

NEW MODEL PLUS

Reliable

The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

Easy to install

The experience of DAB in mechatronics has been condensed in this product that has been made extremely reliable, handsome and versatile.

Easy to set up

The inverter, using the wizard, it is easily readable on the display, guide the installer to the inclusion of all the necessary parameters and helps in some cases, the definition of the setting is appropriate.

NEW INTERFACE DISPLY AND SOFTWARE

Software

Same functionality as the previous version.

Connectivity with other equipment on all models up to 8 pumps.

Backward compatibility of software that is able to upgrade its previous versions.

OLED Display

Installation wizard and simplified by using the Wizard.

Improved the usability of the information thanks to the graphic display.

Better visibility for resolution and high contrast.

Graphical explanation and description of the parameter.

Possibility to choose the language of the menu.

Interface

New button 'ENABLE' to shut down/restart the machine.

NEW CONSTRUCTION OF THE COVER

Cable glands trade replaced the old cable glands moulded providing greater protection.

Added, at the bottom, 3 holes closed for inputs/outputs with screw cap M16.

The external screws of the clamping of the cover, and the area of the seal increase the sealing reliability of the cover.

Seat OR of the cover with better compression and seal.

NEW CONSTRUCTION OF THE BODY

NEW CONSTRUCTION OF THE SINK

Improved cooling of the inverter through the increased opening for the passage of water on the sink.

Two models: one for 230 and a 1-Basic and one for 400 and great, and the internal pocket to help the dissipation.

Coupling screws to the card more accessible: allow you to remove the card while maintaining the system under pressure.

Material CW617N instead of CW614N suitable for certification of drinking water in most states.

NEW CONSTRUCTION OF THE ELECTRONIC CARD

And increased reliability due to transformer Switching and non-linear, which has also permitted a reduction of the weight.

The cards are unified, and all models have 4 Input and 2 Output.

The version 8.5 Arms now has an available input.

Possibility of installing a pressure sensor, auxiliary. For example, it can be installed after a filter (e.g. water softener) or a boiler to compensate for their losses.

NEW CONSTRUCTION OF THE NON-RETURN VALVE

Seals on the sleeve ensuring greater tightness and minimum flow the lowest.

Solves the problem of leakage continues.

Max flow rate 300 l/min guaranteed load losses to 9 metres instead of 15.

Special screws of fastening from the outside (any leakage will not damage the card).

The screws used are torx with pin anti-theft, with head gasket.

Easily maintained thanks to the possibility of replacing the or.

The material NORYL.

Recensioni

Scheda tecnica

Prodotti correlati

Customers who bought this product also bought:

Download